Water and Cavity Detector Up To 250 Meters
-
Worldwide Free Shipping
-
2 Year Manufacturer Warranty
-
Made in Germany
Looking for DEEP DETECTION? If so, you may enjoy further info here - 2-STEP Detector Finder in OKM EXPLORER
Features
- Geoelectric Water And Cavity Detector: Determines the ground resistance up to a depth of 250m and visualizes the measured values in 3D
- Depth: Customers found water up to 250 meters
- Use Cases: Water detection, cavity detection, geotechnical engineering
- Operating Modes: Geoelectrical scan
- Detectable Objects: Water deposits, water-bearing gravel, cavities
Package Includes
- Controller incl. charger
- Android Tablet
- Waterproof and Shock Resistant Pelican Case
- 8x AA Battery 1.5 V (rechargeable)
- Power Pack
- Power Box incl. charger
- 2x Power Cable Drum (Ø 290 mm)
- 2x Voltage Cable Drum (Ø 120 mm)
- 2x Connecting Cable (2m)
- 4x Electrode
- USB Flash Drive with OKM Visualizer 3D Studio Professional Edition
- User's Manual
- Pre-configured Windows Notebook
Variants
Water Detector And Cavity detector Up To 250 Meters (820 ft) Depth
Are you looking for underground water resources or hidden cavities up to depths of 250 meters (820 ft)? The GeoSeeker is a professional geoelectrical water detector and cavity detector that measures the ground resistivity and visualizes its scan data in incredible 3D graphics. It is a very mobile and easy-to-operate geoelectrical detector designed and manufactured in Germany.
The GeoSeeker utilizes a geoelectrical measurement procedure based on Schlumberger to read the apparent resistivity of the ground. Based on that ground resistivity the detector is capable to locate underground water deposits, water-bearing gravel, and groundwater levels as well as cavities like caves, tunnels, chambers, and the like. Thus, the geophysical detector can be deployed as a water finder or cavity detector at the same time.
GeoSeeker Scan Modes
The GeoSeeker’s hardware components are completely controlled by a modern Android Tablet PC. All commands and measurement results are transferred wireless via Wi-Fi. Using the pre-installed software application you simply select one of three supported scan modes:
- Active Scan (Accurate)
- Active Scan (Quick)
- Passive Scan
-
Active Scan (Accurate)
While using this scan mode the GeoSeeker utilizes two electrodes to inject electrical power into the underground soil. Two additional electrodes are measuring the potential difference (fall of voltage) at specific scan points to calculate the final resistivity value. This mode is used to detect underground water deposits, hidden caves, or even impervious layers and barriers within the underground soil. Inactive scans, you will be able to define a specific depth range in that you are going to conduct your measurement. So you will define a starting and ending depth between 5 meters (16 feet) and 250 meters (820 feet). -
Active Scan (Quick)
This scan mode is a quick version of the accurate scan. It is also injecting electrical current into the underground and measuring the potential difference (fall of voltage) to calculate the resistivity of the ground. -
Passive Scan
While using this scan mode the GeoSeeker only utilizes two electrodes to read the naturally occurring voltage of the underground (no electrical power is injected into the underground). This mode is used to detect underground flowing water only.
For more info on OKM GeoSeeker - watch the OKM GeoSeeker video here!
For Quick setup, Watch here!
GeoSeeker Software
The GeoSeeker’s software application is providing simple step-by-step instructions to assist you in completing the measurement. You simply follow these pictured instructions until your measurement has been finished. After completing the measurement a graphical 3d representation of the measure values is created and displayed on the screen of your Tablet PC. Some color adjustment options are provided to optimize the graphical 3d visualization of your underground water deposits, water-bearing gravel, and groundwater level (shown in bluish colors) as well as cavities, caves, tunnels, chambers, or impervious layers (shown in reddish colors).
GeoSeeker Languages
The graphical user interface of the water detector GeoSeeker is available in the following languages:
- Deutsch
- English
- Français
- Español
- Italiano
- عربي
- Ελληνικά
- Türkçe
- 中文
- Pусский
- Nederlands
- فارسی
GeoSeeker Transportation
The GeoSeeker’s hardware is built-in into a waterproof and shock-resistance Peli case. So your geoelectrical equipment is well packed and always ready for transportation.
For more info on OKM GeoSeeker - watch the OKM GeoSeeker video here!
For Quick setup, Watch here!
Voltage Cable Drums (Ø 120 mm)
- 360 x 290 x 200 mm
- 6.5 kg
- 255 m
- 15
Power Cable Drums (Ø 290 mm)
- 120 x 120 x 45 mm
- 0.65 kg
- 26 m
- 25
Controller (Receiving Unit)
- 130 x 270 x 110 mm
- 0.6 kg / 2.1 kg (with mounted cable reels and batteries)
- 4096 Hz (64 times oversampling of a 512 samples mean value)
- Min. 16 hours (charged batteries)
- 3 h / max. 5 h (empty batteries)
- 80 MHz Cortex M3
- 16 bit
- WLAN-Accesspoint, 2.4 GHz band, channel 6, WPA2
- 2.4 GHz band, on-demand, proprietary
- –1400 to +1400 mV
- Min. 16 seconds
- 8 – 14 V DC
- 12 V DC / 1.5 A
- Approx. 12 MΩ
Power Box (Sending Unit)
- 230 x 550 x 360 mm
- 15.8 kg / 18 kg (with mounted Electrodes)
- 100 h (min. Power) / 40 h (average Power) / 8 h (max. Power)
- Max. 8 hours
- Max. 390 V / 0.5 A / 20 W
- 2.4 GHz band, on-demand, proprietary
- 24 V DC / 2 A
- Lead Acid Battery (2 x 12 V, 10 Ah)
Electrodes
- 440 x 120 x 35 mm
- 0.52 kg
*Shipping:
- This device ships free, internationally.
- For free shipping, you need to submit a phone number. We share your phone number with the carrier.
- If you do not submit a phone number we can not guarantee that the carrier will accept your package.
*Import Duties, Taxes, and Charges:
( For international customers that are located outside of the United States. )
- Import Duties, Taxes, and Charges are not included. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to buying.
- Please don't hesitate to reach out with any questions and/or concerns that you may have.
Looking for DEEP DETECTION? If so, you may enjoy further info here - 2-STEP Detector Finder in OKM EXPLORER
For more info on OKM GeoSeeker - watch the OKM GeoSeeker video here!
For Quick setup, Watch here!
For more OKM detectors - Click Here
Buy it now with WIRE PAY!
Request a "Wire Pay Discount" here!
How to pay with Bitcoin
How to pay with Crypto
Shop Gift Cards
Buy Metal Detectors
Buy Gold Detectors
Buy Gold Prospecting Gear
At DestinationGoldDetectors.com we currently use BitPay as our crypto payment processor and can accept crypto payments with Bitcoin (BTC), Ethereum (ETH), Bitcoin Cash (BCH), Dogecoin (DOGE), Shiba Inu (SHIB), Litecoin (LTC), XRP (XRP), Dai (DAI), Wrapped bitcoin (WBTC), Gemini USD (GUSD), USD Coin (USDC), Binance USD (BUSD), ApeCoin (APE) and Euro Coin (EUROC).
Click here for detailed "How To Buy With Crypto" instructions.