XP DEUS II Software Update Instructions

DEUS II - New Update Available

 

Current version to date is v1.0 - Update Instructions Here

 

Previous Update: V0.7

→ See the improvements made here ←

DEUS II is an evolving detector and constantly improving. Our engineering team will regularly release new updates.

Once you have your new DEUS II, or in the wait of receiving it, we recommend to install the DEUS II  UPDATER software on your PC.

Make sure to update your remote control and headphones upon receipt.

Please make sure you download the latest update. This will allow you to detect with the latest version and the latest improvements! 

 

XP DEUS II Update V0.7

Below are all the instructions you need to follow to successfully update the DEUS II to the latest version and any future versions that are released.

1. Download the latest software DEUS II UPDATER
2. Then install the new application
3. Then follow the instructions to install the update on the DEUS II Remote Control & on the WS6 headphones

For the Remote Control you have to:

• Launch the update program
• Select DEUS II in the top left corner of the update application
• On the remote control, go to OPTION > SETTINGS > UPDATE and confirm
• Use the 3 output USB cable. Plug the circular connector to the DEUS II remote control and the USB output to your PC (USB port 2.0 or 3.0, not 1.0)
• Then the device will start to update automatically.
• Do not unplug anything before the application will not finish to perform the update

 For the WS6 headphones you have to:

• Use the single USB cable we provide with the detector. Plug it to the WS6 and to your PC on 2.0 or 3.0 USB port. (not 1.0)
• Select WS6 in the top left corner of the update application
• On the headphones:
  • Press the ⚙️ button to access the menu, scroll with the same button and select SETTINGS by pressing the button for 3 seconds
  • Scroll with the same button and select UPDATE by pressing the button for 3 seconds
  • Press the Menu button (bottom right) for 3 seconds to confirm
  • Then the headphones will start to update automatically

• Then the headphones will start to update automatically

Note: for DEUS II delivered on V0.3 or above:

You need to activate the UPDATE option on the SETTINGS menu. Before making the update please apply the following steps:

 

For the remote control you have to:

• Go to OPTION menu
• Go to SETTINGS menu
• Go to INFOS
• Press 3 seconds at satime the three buttons (left bottom / middle top / right bottom)
• Then UPDATE is now available and you can use it (keep going on following the instructions on the application)

 

For the WS6 you have to:

• Go to SETTINGS (press 3 sec)
• Go to INFOS
• Press 3 seconds on menu button (left bottom)
• Then UPDATE is now available and you can use it (keep going on following the instructions on the application)

 

 

DEUS II UPDATER - DOWNLOAD HERE

 

At any time you can start the DEUS II UPDATER from your PC to find out the latest version available for your DEUS II.

Or from the DEUS II  webpage in the Technical Support section at the bottom of the product page (see image below).