Mega Detection Phoenix Set-Up Procedures

Publicado por Destination Gold en

GETTING STARTED

Registering:
You will need your device serial number and an email address handy for the registration purpose.
 
Passcode Retrieval:
You will need your password to set-up and use your new Phoenix device.  Your initial password will be emailed to you once you have registered your device at 

 

CHARGING THE DEVICE

MEGA DETECTION PHOENIX 3D GROUND SCANNER BATTERY

The power of the Phoenix 3D Ground Scanner is supplied by a rechargeable 12-volt lithium-ion polymer battery with a capacity of 21000 mAh. It is specially designed in the form of an external box with an on/off button with a battery status indicator. The 12-volt is the voltage of this battery and not the voltage of charging, so before use, it is highly suggested that the user must charge the battery using the supplied charger that works on 220 volts which is inside the accessories box. USA  voltage is 110 volts so the use of an adaptor is recommended.

MEGA DETECTION PHOENIX 3D GROUND SCANNER CHARGER
The battery guarantees a relatively long use time, and the operating time is related to several factors, including the search system, the search tools used, and the energy-saving settings available in the device program.

CHARGING THE BATTERY

To charge the device’s battery, it must first be turned on in order to know the charging progress through the four LED lights which gradually lights up according to the charging progress.
The charging completion is known by lighting the last LED in green.
It is recommended to charge the battery for two hours before use, which will be enough for an average use of about 3 working hours.

In case there is a problem with the battery, please contact our main distributor in order to request a replacement battery. www.MegaLocators.com

Compartir esta publicación



← Publicación más antigua


Dejar un comentario

Por favor, tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados